X-ray absorption signatures of hydrogen-bond structure in water–alcohol solutions

Despite fundamental importance, the experimental characterization of the hydrogen bond network, particularly in multicomponent protic solutions, remains a challenge. Although recent work has experimentally validated that the oxygen K-edge X-ray absorption spectra is sensitive to local hydrogen bond patterns in pure water and aqueous alcohol solutions, the generality of this observation is unknown—as is the sensitivity to the electronic structure of the alcohol cosolvent. In this work, we investigate the electronic structure of water solvated alcohol model geometries using energy specific time-dependent density functional theory to calculate oxygen K-edge X-ray excitations. We find that the geometry of dangling hydrogen bonds in pure water is the main contributor to the pre-edge feature seen in the X-ray absorption spectra, agreeing with previous experimental and theoretical work. We then extend this result to solvated alcohol systems and observe a similar phenomenon, yet importantly, the increase of electron donation from alkyl chains to the alcohol OH group directly correlates to the strength of the core excitation on the dangling hydrogen bond model geometry. This trend arises from a stronger transition dipole moment due to electron localization on the OH group.     

Catalytic Generation and Chemoselective Transfer of Nucleophilic Hydrides from Dihydrogen

Copper(I)–N-heterocyclic-carbene (NHC) complexes enabled the catalytic generation of nucleophilic hydrides from dihydrogen (H₂) and their subsequent transfer to allylic chlorides. The highly chemoselective catalyst displayed no concomitant hydrogenation reactivity; in fact, the terminal double bond formed in the hydride transfer remained intact. Switching to deuterium gas (D₂) allowed for regioselective monodeuteration with excellent isotope incorporation.     

Dissipation of chlortetracycline in the aquatic environment: Characterization in terms of a generalized multiphase pseudo–zero-order rate law

The kinetics of the dissipation of chlortetracycline in the aquatic environment was studied over a period of 90 days using microcosm experiments and distilled water controls. The distilled water control experiments, carried out under dark conditions as well as exposed to natural sunlight, exhibited biphasic linear rates of dissipation. The microcosm experiments exhibited triphasic linear rates of degradation both in the water phase (2.7 × 10⁻², 7 × 10⁻³, 1.3 × 10⁻³ μg g⁻¹ day^–1) and the sediment phase (3.4 × 10⁻², 6 × 10⁻³, 1 × 10⁻³ μg g⁻¹ day^–1). The initial slow rate of dissipation in the dark control (3 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation and hydrolysis, whereas the subsequent fast rate (1.8 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation, hydrolysis, and microbial degradation. For the sunlight-exposed control, the initial slow rate of dissipation (1.5 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation, hydrolysis, and photolysis, whereas the subsequent fast rate was attributed to a combination of evaporation, hydrolysis, photolysis, and microbial degradation (5.1 × 10⁻³ μg g⁻¹ day^–1). The initial fast rate of dissipation in the water phase of the microcosm experiment is attributed to a combination of evaporation, hydrolysis, photolysis, and microbial degradation, whereas all subsequent slow rates in the water phase and all rates of degradation in the sediment phase are attributed to microbial degradation of the colloidal and sediment particle adsorbed antibiotic. A multiphase zero-order kinetic model is presented that takes into account (a) dissipation of the antibiotic via evaporation, hydrolysis, photolysis, microbial degradation, and adsorption by colloidal and sediment particles and (b) the dependence of the dissipation rate on the concentration of the antibiotic, type and count of microorganisms, and type and concentration of colloidal particles and sediment particle adsorption sites within a given aquatic environment.     

Comparative pharmacokinetic study of four major bioactive components after oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and corticosterone‐induced depressive rats

A highly selective and efficient LC–MS/MS method was developed to determine the plasma concentration of magnolol, hesperidin, neohesperidin and geniposide following oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and depressed rats. Plasma samples were pretreated by protein precipitation with methanol. Chromatographic separation was performed on an XTerra^® MS C₁₈ column using a gradient elution with a mobile phase composed of acetonitrile–0.1% aqueous formic acid. The proposed method was validated to be specific, accurate and precise for the analytes determination in plasma samples. The calibration curves displayed good linearity over definite concentration ranges for the analytes. The intra‐ and inter‐day precision of the proposed method at three different levels were all within <11.13% and the relative errors ranged from ?8.46 to 8.93%. The recovery of the four compounds ranged from 82.72 to 89.08% and no apparent matrix effect was observed during sample analysis. After full validation, the established method was successfully applied for comparing the pharmacokinetics of four components between normal and depressed rats. The results showed that the AUC and C_max of four analytes in depressed rats were significantly different from those in normal rats and might provide helpful information to guide the clinical use of Zhi‐Zi‐Hou‐Po to treat depression.     

Validation of quartz crystal rheometry in the megahertz frequency regime

The utility of the quartz crystal microbalance (QCM) as a high‐frequency rheometer operating at 15 MHz was demonstrated. High‐frequency data obtained from a series of rubbery materials were compared with results obtained from traditional dynamic mechanical analysis (DMA) at much lower frequencies. The high‐frequency data enable meaningful shift factors to be obtained at temperatures much further above glass‐transition temperature (T _g) than would otherwise be possible, giving a more complete picture of the temperature dependence of the viscoelastic properties. The QCM can also be used to quantify mass uptake and changes in viscoelastic properties during sample oxidation. The viscoelastic response spanning the full range of behaviors from the rubber to glassy regimes was found to fit well with a six‐element model consisting of three power‐law springpot elements. One of these elements is particularly sensitive to the behavior in the transition regime where the phase angle is maximized. The value of this quantity is obtained from the maximum phase angle, which can be obtained from a temperature sweep at fixed frequency, proving a means for more detailed frequency‐dependent rheometric information to be obtained from a fixed‐frequency measurement at a range of temperatures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1246–1254     

Synthesis,self-assembly,and photomechanical actuator performance of a sequence-defined polyviologen crosslinker

ABSTRACT

Although it is well known that viologen radical cations can self-assemble into stacks or complexes on account of radical-radical pairing interactions, it has only recently been demonstrated that reduction of main-chain polyviologens integrated into hydrogel networks can trigger actuation. In these earlier examples, hydrogels comprising oligoethylene glycol-based polyviologens and poly(ethylene glycol) were functionalized with terminal azide groups to prepare ‘click’-based gels. Here, we report a new structural design for the functional polyviologen that consists of main-chain viologen subunits separated by hexamethylene groups instead of glycols and is capped at each end with styrene groups. Activation of this viologen-based macrocrosslinker was achieved using chemical- and photoreduction methods and its ability to undergo intramolecular chain-folding was monitored by absorption spectroscopy. Acrylate-based organogels and hydrogels were also prepared and a comparison was carried out to assess the actuator performance in each gel in terms of the rate of contraction and changes in stiffness.     

Condensed Mode Cooling of Ethylene Polymerization in Fluidized Bed Reactors

This review gives an overview of the evolution of the technology of condensed mode cooling, primarily for the case of ethylene polymerization on supported catalysts in fluidized bed reactors. It is well known that this mode of heat removal is quite effective in allowing polyolefin manufacturers to increase significantly production rates. What is perhaps less well understood are all of the issues that, in addition to the effect of the latent heat of vaporization of injected liquid components, also have an impact on the rate of production and behavior of the reactor. However, the liquid components injected into the reactor can vaporize rapidly under full‐scale conditions, leaving behind several heavy components (with respect to ethylene) that have numerous effects on how the particles behave, on the reaction rate, and on fluidization, fouling, and other parameters related to reactor and process performance.     

Preparation and characterization of magnetic graphene nanocomposite containing Cu(proline)2 as catalyst for asymmetric aldol reactions

Research on Chemical Intermediates - A new catalyst has been prepared via immobilization of Cu(proline)2 complex onto the surface of magnetic graphene. The fabricated nanocatalyst was characterized...     

High-Throughput Synthesis and Characterization of Aryl Silicones by Using the Piers–Rubinsztajn Reaction

Arylsilicones are widely exploited for their thermal and optical properties. The creation of phenylsilicone elastomers with specific physical properties is typically done by a “one-off” formulation and test process. Herein, it is demonstrated that high-throughput synthesis methods can be used to rapidly prepare a series of arylsilicone elastomers and then the relative impact of different aryl groups on their physical properties is assessed. Aromatic groups were incorporated into polydimethylsiloxane (PDMS) elastomers by exploiting the relative reactivity of different functional groups in the Piers–Rubinsztajn reaction. To analyze trends in the silicone mechanical properties as a function of increasing aryl concentration—structure/property relationships—libraries of elastomers were both quickly synthesized and characterized by using high-throughput suites starting from low viscosity silicone oils/monomers in 96-well plates. Liquid handling parameters were optimized to effectively work with the silicones. Incorporating aryl instead of alkyl crosslinkers into the PDMS backbone increased the silicone elastomer modulus by approximately 50 % (at a crosslink density of 6 %); elastomers prepared with an aromatic crosslinker with three contact points led to much higher moduli compared with those with one contact point at the same crosslink density. When located at precise rather than random points on the silicone chains, diphenylsilicones had lower moduli than analogous monophenylsilicones.     

Pull-in Instability Analysis of Nanoelectromechanical Rectangular Plates Including the Intermolecular,Hydrostatic, and Thermal Actuations Using an Analytical Solution Methodology

The current paper presents a thorough study on the pull-in instability of nanoelectromechanical rectangular plates under intermolecular, hydrostatic, and thermal actuations. Based on the Kirchhoff theory along with Eringen's nonlocal elasticity theory, a nonclassical model is developed. Using the Galerkin method(GM), the governing equation which is a nonlinear partial differential equation(NLPDE) of the fourth order is converted to a nonlinear ordinary differential equation(NLODE) in the time domain. Then, the reduced NLODE is solved analytically by means of the homotopy analysis method. At the end, the effects of model parameters as well as the nonlocal parameter on the deflection, nonlinear frequency, and dynamic pull-in voltage are explored.